Nickel-cadmium batteries are also available as cell assemblies and packs. Both cylindrical and button cells may be packaged in any configuration to meet electrical and dimensional requirements.

When specifying battery assemblies, the following information should be given:

1. Size and type of cell
2. Voltage or number of cells
3. Configuration of cells: e.g., 1 x 4, 2 x 5, stick, etc.
4. Packaging method: taped or glued with hot melt; with or without shrink wrap
5. Termination: button top, solder tabs (incl.direction) or wire leads with or without connectors